New from Projecta, the Intelli-Charge IDC25 is the toughest and most advanced dual battery management system available on the market today.
Allowing you to charge your 12V second/auxiliary deep cycle battery on the go, the IDC25 is shock, vibration and dust proof. The unit is also water resistant, making it suitable for both
in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, IDC25 can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind.
The IDC25 sets a new benchmark for DC-DC battery management.
SPECIFICATIONS
Operating Conditions
Alternator Input Voltage 9-32 Vdc
Maximum Solar Input Voltage 23 Vdc
Maximum Input Current 40A
Input Current (No Load) 20mA
Back Drain on Auxiliary Battery 9.5 – 10.5mA
External LED Output – Constant Current 4 mA
Output Current Input 9–11Vdc: 20A
Input 11V-32dc: 25A
Input Fuse Rating 50A (Not supplied)
Output Fuse Rating 50A (Not supplied)
Maximum Output Power 385W
Solar Input Turn On Voltage 9V
Size 149 x 122 x 42 mm
Weight 800g
Operating Temperature (Derated from 55oC) -10 to +80oC (Ambient Temperature)
Charge Control
Charge Type 3 Stage
Bulk *20A at 9-11Vdc, 25A at 11-32V dc *Constant Current up to:
GEL AGM WET CALCIUM
14.1V 14.4V 14.7V 15.4V
Absorption Constant Voltage until current drop to 3.8A
GEL AGM WET CALCIUM
14.1V 14.4V 14.7V 15.4V
Float Keep Constant Voltage at 13.7V
Equalisation 3.8A Constant Current Charge up to 16V
(Calcium mode only) then hold for 1 hour (5 hour timeout)
Battery Range
Battery Capacity 75-300Ah
Type of Batteries Supported GEL, AGM, WET & CALCIUM
Operating Mode
12V Vehicle 24V Vehicle
VSR Mode – Default (Ignition Override Turn on Turn off Turn on Turn off
Not Connected) 13.4-20V <12.8V 26.8-32V < 25.6V
Low Voltage Mode – Ignition Override cable Turn on Turn off Turn on Turn off
connected to ignition switch (ignition on) 12.2-20V <11.9V 24.4-32V <24V
Standards
EMC C-Tick, AS/NZS CISPR 11:2011 Class B
IP Rating IP67
Projecta Intelli-Charge IDC25
$390.00 inc. GST
Delivery available.
Contact us direct on (07) 5422 9771 or email info@solar2camp.com.au to arrange.
Description
New from Projecta, the Intelli-Charge IDC25 is the toughest and most advanced dual battery management system available on the market today.
Allowing you to charge your 12V second/auxiliary deep cycle battery on the go, the IDC25 is shock, vibration and dust proof. The unit is also water resistant, making it suitable for both
in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, IDC25 can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind.
The IDC25 sets a new benchmark for DC-DC battery management.
SPECIFICATIONS
Operating Conditions
Alternator Input Voltage 9-32 Vdc
Maximum Solar Input Voltage 23 Vdc
Maximum Input Current 40A
Input Current (No Load) 20mA
Back Drain on Auxiliary Battery 9.5 – 10.5mA
External LED Output – Constant Current 4 mA
Output Current Input 9–11Vdc: 20A
Input 11V-32dc: 25A
Input Fuse Rating 50A (Not supplied)
Output Fuse Rating 50A (Not supplied)
Maximum Output Power 385W
Solar Input Turn On Voltage 9V
Size 149 x 122 x 42 mm
Weight 800g
Operating Temperature (Derated from 55oC) -10 to +80oC (Ambient Temperature)
Charge Control
Charge Type 3 Stage
Bulk *20A at 9-11Vdc, 25A at 11-32V dc *Constant Current up to:
GEL AGM WET CALCIUM
14.1V 14.4V 14.7V 15.4V
Absorption Constant Voltage until current drop to 3.8A
GEL AGM WET CALCIUM
14.1V 14.4V 14.7V 15.4V
Float Keep Constant Voltage at 13.7V
Equalisation 3.8A Constant Current Charge up to 16V
(Calcium mode only) then hold for 1 hour (5 hour timeout)
Battery Range
Battery Capacity 75-300Ah
Type of Batteries Supported GEL, AGM, WET & CALCIUM
Operating Mode
12V Vehicle 24V Vehicle
VSR Mode – Default (Ignition Override Turn on Turn off Turn on Turn off
Not Connected) 13.4-20V <12.8V 26.8-32V < 25.6V
Low Voltage Mode – Ignition Override cable Turn on Turn off Turn on Turn off
connected to ignition switch (ignition on) 12.2-20V <11.9V 24.4-32V <24V
Standards
EMC C-Tick, AS/NZS CISPR 11:2011 Class B
IP Rating IP67
Additional information
Related products
ENERDRIVE 24V 30A DC2DC Battery Charger EN3DC30-24V
$560.00$520.00 inc. GSTIn Vehicle DC-DC Charger 25 amp. Model-DCC1225ACK-RP (with remote display)
$544.50 inc. GSTIn Vehicle DC-DC Charger 25 amp. Model-DCC1225ACD (NO REMOTE DISPLAY)
$412.50 inc. GST